Re: [T3] Popouts?

["Drake ." <vw_type3@hotmail.com>]

<x-flowed>

> the B pillars to make holes to install the hinges. You REALLY should have a
> correct car to copy these holes from.

Ok, not something undertaken lightly then.


> Dwell, timing, valve lash, charging system regulating voltage....

> I can't remember what we have discussed, but you have to set your timing by
> the special '72 instructions in the Bentley.

Ahh thanks the system voltage is another thing that I havent really checked 
out fully. I did a quickie check, but I dont remember what the numbers were 
now. I have the '72 thats not a 72 ;p i.e. it only has a vac advance can 
#265 on the arm or was it #256? Also some of the other hoses are not correct 
for a 72. It was said previously that I should adjust timing as if it were a 
71.

My current issue as of yet still unsolved is that my idle is too low, or 
more specifically that it wont adjust above 850. I have checked out 
everything that I can think of and that has been recommended here, with the 
exception of the fuel pressure and the system voltage.

Thanks
Drake
'72 Square FI
San Jose, Ca.



_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/

</x-flowed>