[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Wiper Question


<x-charset ISO-8859-1>on 20/3/02 7:24 AM, Wuzmop@aol.com at Wuzmop@aol.com wrote:

> My wipers will not work on high speed. What should I check first? I assume it
> is in the switch, is there anything else it could be? Car is a 73.
The brushes, my '71 Super had the same problem before I sold it. There are 3
brushes in there, two opposite each other and one 90ลก out from the other two
(this gives you the high and low speeds). One brush had worn down more than
the other two for some reason. Check for 12V coming out of the switch before
you go taking the whole motor assembly out though, and then you will know
for sure.

HTH,
Ben Doughney

'75 1200L
'63 1200 - Ringo

http://members.tripod.com/~superkafer/ 

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe

</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]