[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Oil sender


On 1 Mar 2002, at 13:15, Ryan_Schamper@hermanmiller.com wrote:

> Does anyone have a picture of where the oil dummy light hooks to the
> engine? I have asked this before but could not find it. I tested the light
> and that works so the wire must not be hooked up by the engine. I should
> find it towards the front drivers side on top am I correct? When I bought
> the squareback they had switched it to a carburetor so there are loose
> wires, one of them must be it?

The oil pressure switch sticks straight up out of the oil cooler: top of the 
engine, about 5" left of center, toward the front. You can check the circuit by 
just grounding the wire to the engine. The light should light then.

-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]