[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sun, 2002-06-30 at 19:15, Ben Doughney wrote: > on 1/7/2002 8:24 AM, Russ wolfe at russella@prairieinet.net wrote: > > > You should be able to tighten it with an open end wrench. I have done > > many this way over the years. It could be that someone over time has put > > the wrong bolts back in there. If so, they will need to be watched for > > coming loose. > How can I tell if the bolts are the proper ones or not? They were loose, but > I got the spanner in there and tightened them up all right. > The original bolts were a sort of flange head bolt. Like there is washer forged as part of the bolt head. The under side of this flange was serrated, acting as a lock when tightened. -- Russ Wolfe '66 FB MT (It drove) '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/