Re: [T3] Compression Ratio Recommendations

["John Connolly" <john@aircooled.net>]

<x-charset iso-8859-1>so back out the timing! There's nothing wrong with running less ignition
timing to get a proper burn, if you have more CR. Some of our engines run
full advance of 18 degrees! That "30-32 degrees total timing" is hogwosh, it
all depends on the engine.

John
Aircooled.Net Inc.

----- Original Message -----
From: "Keith Park" <topnotch@nycap.rr.com>
To: <type3@vwtype3.org>
Sent: Saturday, June 15, 2002 4:51 PM
Subject: Re: [T3] Compression Ratio Recommendations


> The domie motors were 7.7 and they burned pistons like mad!
> My Square has 7.2 and it knocks on 89 octane... Id never go this high!
>
> Keith
>
>
> >
> > I'd set it at somewhere around 7.8:1-8.2:1.
>
>
> ------------------------------------------------
> To unsubscribe, E-mail to: <type3-off@vwtype3.org>
> For more help, see http://vwtype3.org/list/
>


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/
</x-charset>