[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>Weld a blob of metal onto them and turn that with a self-grip wrench. You may still have trouble if there's been a lot of rust on the screws inside. Drilling them might screw them inside the inner sill - not a problem unless they rattle! Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ----- Original Message ----- From: "ApoplexY" <apoplexy@eradain.com> To: "Type3 (E-mail)" <type3@vwtype3.org> Sent: Sunday, June 02, 2002 11:36 PM Subject: [T3] Pan Bolts > > Welp, got everything done but the speedo cable and dropping the engine then > we sheared off 6 pan bolt heads halfway out. Does anyone have any > experience getting these out? Should have torched them, I know.... > Is my only option to drill them out? What does this do to the threads for > screwing in new bolts etc? > > Thanks, > Carrie > http:www.eradain.com/vwcompound > ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/ </x-charset>