[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 29 Jul 2002, at 14:59, Ben Doughney wrote: > One thing though, when I was putting the switch in, I did the screws up all > of the way, but then the lever was 'slugish' to return to the off position. > I loosened off the screws on the right side a bit, and that made it work > properly. Since I don't want to go wrecking a new indicator switch, is it > safe to leave them slightly loose like that? It shouldn't be necessary to leave them loose. I suspect that something is out of place and is being pinched when you tighten them all down. You're better off now just pulling it out a bit and finding out what the problem is, rather than waiting for something to pinch thru the insulation and burn up the wires or worse. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/