[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Type 3 Junkie wrote: > Ok , > Since we are on this topic... > I mounted my Porsche Alloys on my 69 (IRS) Fastback and here is the issue i > am having...On the back wheels I cannot use the center cap on the wheel as > the end of the axle sticks out just far enough to affect the center cap by > not letting it set in the hub. I ran into this problem on a couple T3's I had / have with alloys, and drilled drums. My solution was to run a spacer between the wheel and the drum. I press in longer studs in the back to compensate for the thickness of the spacer. Greg -- Vintage Warehouse PO Box 2321 Windsor, Ca. 95492 707.291.7606 http://vintagewarehouse.com ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/