[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

[T3] dialing in my carbs...


<x-charset iso-8859-1>I recently installed a new set of Weber 34ict carbs on my 1600dp with a mild
cam.  I have adjusted and balanced them and the performance is definitely
better than with my old and leaky solex's, except for one problem:

It seems that not enough gas is being delivered to the carb(s) when you
first roll on the throttle.  The engine sputters and coughs when taking off
from the line or when on the road and having either decelerated or leveled
off the throttle, then opening it slightly. If depress the accelerator
sufficiently, it will run smoother.  It also gets better as the engine warms
up.  But at no time is it completely gone.

I replaced the fuel filter I have in front of the fuel pump and have checked
that the tank filter screen is clear, all looks good.

Since I see no other adjustments than the idle screw and idle mixture
needle, my best guess is that it is running too lean and may require new
jets.  If this is correct, how to determine the correct size and where do I
get them?  If not, any suggestions would be greatly appreciated.

Regards,

Dave B
'64 notch (Esther)
Summerland, Ca



------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/
</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]