[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Couple of questions


<x-charset iso-8859-1>Yes if you remove the crash tube the bumper is essentialy the same as on non
tube cars. I have a 69 bumper on my 62.
The rear reflectors were originaly painted from 61-63, and were the small
non-wraparound type. From 64-67 they were chrome wraparound. Then in 68-69
they went back to small non wraparound but were chrome. After 69 they were
deleeted. Hope this helps.

Late
Jason
----- Original Message -----
From: "Mike Burkey" <mikeburkey@yahoo.com>
To: <type3@vwtype3.org>
Sent: Tuesday, July 09, 2002 12:11 PM
Subject: [T3] Couple of questions


> I have a front bumper that has the reinforcement tube
> assembly installed and a date stamp of 2/69 on the
> bottonm of the blade. I know that the reinforcement
> tubes were started in 68 and that the later bumper
> style started in 70 but can this bumper blade and
> brackets be used on an earlier car if I remove the
> reinforcement tube?
>
> Secondly, I have a few sets of early rear fenders and
> was wondering which years had the extended chrome
> housing (on the outer edge-also has the mounting
> screw) for the reflector and which years had the small
> (same dimension on both sides-no external screw)
> chrome housing?
>
> __________________________________________________
> Do You Yahoo!?
> Sign up for SBC Yahoo! Dial - First Month Free
> http://sbc.yahoo.com
>
> ------------------------------------------------
> To unsubscribe, E-mail to: <type3-off@vwtype3.org>
> For more help, see http://vwtype3.org/list/
>


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/
</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]