Re: [T3] no turning back...

["Allan Williams" <allanw@ihug.co.nz>]

I'm certain it is supposed to go on dry and clean, unless you are building a
performance motor. If so, I would use loctite, the strongest I could.

Allan :-)
----- Original Message -----
From: "Parker-Durost" <ginpete@xprt.net>
To: <type3@vwtype3.org>
Sent: Tuesday, July 09, 2002 6:18 PM
Subject: Re: [T3] no turning back...


>Hehehe... I use a 1" drive rachet :-) The handle is 3 feet long, and
I weigh
like 230lbs or something :-) Easy.

    For 7 bucks I rented a 3/4 drive breaker and socket, my buddy came
over to hold onto the motor and walla, she's off!  Of course this
leads to another question.  There was locktite on there, should I
reassemble with loctite or grease?  If loctite, should I use temp
(blue) or permanent (red)?

Peter Parker
'66 Square; Phillip
Portland, OR


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/




------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/