Re: [T3] Front torsion bar seals

["Mark Fuhriman" <mfuhriman1@hotmail.com>]

<x-flowed>>I greased the torsion bars on my Fastback this morning, and on the lower
> right one, a bit of water spat out along with the old grease.

I've noticed the same thing with all of the old VWs I've acquired over the 
past few years.  I wouldn't worry about it.  You will never find new seals, 
and you probably don't need them.  Just grease the beam regularly from now 
on.  I do it with every oil change.  Easy to remember that way.

> The greaser on the left side took a bit of finding, it was buried under a
> whole lump of greasy dirt. I initially thought it only had one greaser for
> the whole bottom torsion bar-

Umm, did you find all *four* of the grease fittings?  On each side, there is 
an upper and a lower.

-Mark Fuhriman

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/
</x-flowed>