[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>Use a stick or rod of the correct size for the centering tool. I have put many in without a tool just by centering it by sight. Did you check your FLAPS? They usually carry the tools here in the U.S. Thomas E. Potter Technical Specialist II Telephone: (713) 215-2877 Fax: (713) 215-2551 E-mail: tom.e.potter@williams.com -----Original Message----- From: Henrik Larsson [mailto:notchback@home.se] Sent: Wednesday, July 03, 2002 4:07 AM To: type3@vwtype3.org Subject: [T3] Gearbox input shaft seal The clutch replacement on my 1964 Notch has come to an unforeseen halt because I can't find my clutch centering tool. I have been looking for two days now and if I don't find it today, then it would have been faster to order a new one... :-( There appears to be a slight leak from the gearbox input shaft seal and I'm going to replace it. The question is: How do I get the old seal out? The Bentley shows a strange looking special tool, but is there an alternative way to remove the seal? Henrik Larsson, Sweden 1964 and 1968 Notches ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ </x-charset>