[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset ISO-8859-1>I started this thread a week or so ago when I found 3 out of 4 of my ball joint boots on my Square had popped off. Upon closer inspection, the boots were actually split, not popped off. 8^( The ball joints felt good still with no play. I had four good boots on the old front end from my '71 Fasty. I removed them and used them on the Square. The procedure was straight forward, just as the Bentley manual described. I will be adding grease fittings to my ball joints since they have the small plastic plugs in them now. I also noticed that the tie rod boots are shot. I will be replacing them next. Later, John Jaranson '71 FI Auto Fasty (Jane) '66 Square (TBD, but with new ball joint boots) http://hometown.aol.com/jaransonT3 ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe </x-charset>