[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1> ----- Original Message ----- From: "Jim Adney" <jadney@vwtype3.org> > On 22 Jan 2002, at 18:01, Russ Wolfe wrote: > > > And what gaskets do you have between the intake manifold, and the head?? If it > > is the metal one that comes in a gasket set, for the dual port heads, that is > > wrong. The proper gasket for a T-3 dual port, whether it is carb of FI, is the > > plastic/fiber gasket about 3/16" thick with paper on each side. > > That gasket is for FI only. The carb manifolds used a simple paper gasket > below the manifold, but there was a thicker plastic insulator above the > manifold, between the manifold and the carb. > > - Thanks for pointing that out, Jim. I was starting to worry because I'd never seen a twin-carb one like Russ described! ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe </x-charset>