[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>I did the blocking of the original inlets, like yours, while I had mine all apart. I haven't gone back to really look at hooking up a tee or Y yet, but I do have the heater end of it figured out. There is a lot less room under the dash with the air mixers still in the car. One of my heater channels now is a wire raceway, all the stereo wiring (a pretty substantial bundle of wires) runs from the dash to the back seat area. I "stealthed" and "theft proofed" the install quite well I hope! Tom . ----- Original Message ----- From: "neil verdon" <Neil.Verdon@t-online.de> > hello > its all stock eberspacher parts till it gets into my car i have > fabricated the plenum under the glovebox lhs on my rhd car this is then > branched of to the original demist outlets . ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe </x-charset>