[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

RE: [T3] Engine machining.....flat cams


<x-flowed>
>If you find that two of your valves (one on each side, opposite each other)
>never open. This will produce a major loss of power.

Ok, so 'flat' means you wore the lobe off not just that there's little
or no curvature somewhere on the lobe.--no my cam was not flat then.

Jim Rustad
Kennewick WA
71 Square, 76 Bus


_________________________________________________________________
Join the worldās largest e-mail service with MSN Hotmail. 
http://www.hotmail.com

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe

</x-flowed>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]