[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

[T3] Quick part # confirmation: 113 945 515H (ÀH?) for brake light switch.


<x-charset iso-8859-1>This is the part number for the brake light switch that is used on the
master cylinder.  I will need two since I have a dual-circuit cylinder
(1972).  Not sure about the 'H' but the Parts List I have is, of course,
rather old.  Anyhooo, is this the correct part number for me to take to the
FLAPS?

I REALLY need to flush my brake system.  My plan is to use DOT-5 (synthetic)
and I figure while I'm at it I should replace the *original* brake switches
since they don't activate unless I *really* press hard on the brakes.  So,
replace the switches and then the fluid (since I will then have introduced
air into the master cylinder...).

  Toby Erkson
  air_cooled_nut@pobox.com
  '72 VW Squareback 1.6L bored and stroked to 2.0L, Berg five-speed
  '95 VW Jetta III GL 2.0L, P-Chip, Jamex suspension, 2.25" MagnaFlow
exhaust, etc.
  Portland, Oregon, http://www.icbm.org/

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe

</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]