[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 17 Feb 2002, at 8:47, Timothy O'Neal wrote: > it is slightly bent at the same location. Second thoughts: The rod should be straight. If it is bent in such a way that the front end can sag too much, the shift lever ball might not fit all the way into that socket and it might not stay in place. There is also the possibility that the plate where the bushing mounts has broken free, leaving the shift rod completely unsupported. This would also explain your problem and is easy to check for. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/