[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> when I opened it up it was covered with little brass coloured metal > shavings. As far as I can see the rotor was installed OK Assuming the rotor arm is firmly on the shaft, you have either got a cap with the interior pins not turned to the right diameter or the rotor arm is too long. The brass end of the rotor arm should not touch the brass 'contacts' in the cap (maybe 1 mm or so gap). Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/