Re: [T3] engine mount

[Russ wolfe <russella@prairieinet.net>]

On Mon, 2002-12-16 at 21:36, Jim Adney wrote:
> On 16 Dec 2002 at 13:46, Vlach, Joe -CKHS wrote:
> 
> > How would one know if the tube were broken loose?  We replaced the cable, it
> > went in fine.
> 
> Takes 2 people. One sits in the driver's seat while the other watches the rear 
> end of the steel tube (front end of the Bowden tube.) If it moves as the clutch 
> pedal is depressed, it has broken loose from the tunnel.  
> 
Also, if you take the emergency brake boot off, you can look down
through with a flashlight and see it moving. There are 3 anchor points.
right behind the pedal cluster, in the cneter below the e-brake, and at
the rear by the bowden tube.

-- 
Russ Wolfe
'66 FB MT (It drove)
'71 FB AT 
'65 Bug (not running)
russw@classicvw.org
http://www.classicvw.org



------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/