[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sun, 8 Dec 2002 11:06:18 -0800 (PST), alex sundberg wrote: >soooo i took the motor out of the fan housing.took the >fan off the motor and oiled the bearings How did you get the fan off. I couldn't figure out how to do it. slapped it >all back together and proceeded to install the >contraption under the dash. What a hassle that was. >good thing i have a 14 year old son to hold the dumb >thing up while i got the bolts fastened. Well "eki" >now has working heaters and fresh air fan to help >defrost her in the mornings..I also pulled the seats >off thier rails to grease the sliders.. does anyone >know if the seat sliders(the plastic ones)are still >available for a "71 square? All 4 are in dire need of >replacement. Sorry this is so long and rambling. I bought some aftermarket ones that some guy was selling on Ebay and the didn't fit. I now use a rubber mallet to move the seats. I'm hoping that eventualy it will wear them to a point where I can slide the seat. Mark Healey 71 FI auto square 71 FI manual square marksvw@healeyonline.com ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/