[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] engine area tin


this what i needed to know, specifically but i didn't know how to ask, 
thanks.

-matthias
portland, oregon

'66 type I
'74 type II
'67 type III fastback

(* He who angers you, controls you. *)



>>>>In a Type 3, you are supposed to see daylight around your engine (but not
through/around the cylinders).  The top half of the engine is not sealed 
from
the lower half.  There is a big rubber bellows/boot that goes from the 
rear of
the engine compartment body to the rear of the fan housing.  Make sure 
this is
there and in good condition or you will overheat.

You need a Type 3 Bentley manual.  It's written specifically for the fuel
injected (68-73) US models, but it's still relevant for your earlier car. 
This manual has all the engine tin illustrated piece by piece. 

-Mark Fuhriman



------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]