[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Another question on my turn signals. I tested the relay per bentley. I ran a wire from +49 on the relay to 30 on the fuse box. This caused my relay to hum and the dash lights to come on. However, turning on the signals does nothing. Bentley then says to check continuity at 54BL of the switch with R and L, anything over 0 is a bad switch. But I get nothing no resistance. Is there any way to mimic a good switch, a way to engage the signals without the switch? I have checked and rechecked all the wires and am getting stumped. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nevermind, I bypassed the switch by jumping a wire from 54BL with R then L and both turnsignals worked. Its definitely the signal switch. Thanks, Jason Smith 72 Fastback FI AT http://jasontsmith.tripod.com/vw.htm ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/