[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [T3] Oil temp sender (was: Gauges)
- To: <type3@vwtype3.org>
- Subject: Re: [T3] Oil temp sender (was: Gauges)
- From: "Herman Haustein" <haustein@netvision.net.il>
- Date: Thu, 6 Sep 2001 11:30:22 +0200
- References: <9D3B898D35A5D411AC7000A0C96B7AEF02D07438@orsmsx33.jf.intel.com> <000601c130de$39c80f90$9601a8c0@gtixpress>
- Resent-date: Thu, 6 Sep 2001 04:51:46 -0400
- Resent-from: type3@vwtype3.org
- Resent-message-id: <"65AbCD.A.cs.akzl7"@host32.cedant.com>
- Resent-sender: type3-request@vwtype3.org
Isn't this a little optimistic, You want to put the oil pressure sensor
where pressure is the higher and the temp sensor where temp is lower ?
Shouldn't it be the other way around ?
Struck me as wrong way around.
Herman
> This should be good.
>
> My dilema was choosing between the two mounting points. In the T-1
> location, it's in the main oil galley right after the pump and before the
> cooler. The T-3 location is on the output side of the oil cooler. So I
> wanted to mount the oil pressure in the T-1 location to get the output
> pressure from the pump. Then mount the oil temp in the T-3 location after
> the cooler so it reports the temp of oil going to the rest of the motor
> (obviously after warm-up).
>
> Please correct me if I'm wrong on this!
>
> Joe
>
-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org