[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Hello Guys and Gals, I have yet another question. I have Dual Web 34's. The passenger carb is not drawing in air as much as the drivers side. I know that you have to undo one of the linkages and then with the carb of choice sync the other to it. But when the carb is unable to be measured as by a sync tool what is wrong? I tried to adjust the idle control and still nothing. This is what I mean::: Using the measureing tool and at idle the Drivers side carb looks like this........ | | | | |*| | | |_| Using same tool and tool settings the passenger carb looks likes ....... | | | | | | | | |*| The bead didnt even move at all no matter how far I turn the idle adjust screw in or out. Could it be a butterfly sticking? this is a pain in the ass. pardon my language but this sucks. This was like this with my other engine but there was a very slight difference so I didn't bother to investigate. What should I do? I plan on taking the carb completely apart and seeing if there is something more in there. Hopefully its just dirty or a stuck butterfly. I apprieciate everyone's help that I have got in the past. Thank you Erick the daddy 68 fasty __________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe