[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 27 Oct 2001, at 15:05, Herman Haustein wrote: > I saw a thread going on the subject and that got me thinking: > I recently "fixed" my rear brake piston - the bleed valve had broken > off inside, Unfortunately I drilled to far and I distorted the seating > for the bleed valve. I currently fixed this with a simple screw and > Teflon, but I was hoping for a more permanent fix - allowing me to > bleed it successfully . I wanted to ask : are these pistons readily > available ? are they shared with other models - T1 ? Bus ? I certainly have pistons, but it sounds like you need a complete brake cyl assembly. I have good used ones, but I don't think new ones are hard to find. I think yours is a late model, so the bore is 22.2mm (7/8") so make sure that you can see a molded in "22" in the casting if you find a NOS ATe one. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org