[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>That time it got torqued with a bad torque wrench way to high. Herman ----- Original Message ----- From: Jim Adney <jadney@vwtype3.org> To: <type3@vwtype3.org> Sent: יום רביעי 17 אוקטובר 2001 16:26 Subject: Re: [T3] Hesitation > On 16 Oct 2001, at 12:57, Herman Haustein wrote: > > > BTW, there is a thread going about 8mm stud torque spec's , It seems I > > overtightened mine I troqured them to 22-24 ft lbs as for the 10mm studs, I > > still haven't put any miles on the engine, should I drive it this way or try > > loosen them first and torqure them to 18 lb ft. as mentioned? > > You should pull the engine and fix this right away before you pull > the inserts out of the case. I thought we went thru this a year ago > and you fixed it after you pulled out your first set of inserts. > > - > Jim Adney > jadney@vwtype3.org > Madison, WI 53711-3054 > USA > > ------------------------------------------------------------------- > Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe > > </x-charset>