[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
--- Marc Bona <chillz1@angelfire.com> wrote: > I seem to recall someone (maybe Jim) mentioning the > 8mm cylinder studs had a different torque spec ) > > > Get 250 color business cards for FREE! > http://businesscards.lycos.com/vp/fastpath/ > >Torque is 18 foot pounds . (Use hand ratchet to snug nuts) ,set pushrod tubes in place bring bottom four nuts down till just touching metal to metal snug top four back off 1/2 turn on all nuts first torque 10 ft lbs small X big X then reset torque wrench to 18 ft lbs change starting place and do the small X and big X again for final torque Phil ------------------------------------------------------------------- > Search old messages on the Web! Visit > http://www.vwtype3.org/list/ > __________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com