[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 24 Nov 2001, at 14:15, Mike Wodkowski wrote: > Bentley says that if the dwell moves more than a couple degrees when > the engine is brought from idle to 2000 rpm, then there's a prob. with > the distributor shaft, so there's a way to diagnose it. Right, but I've never personally seen this problem correlate with a dwell change like this. > Could the trigger contacts create this kind of problem? Or misplaced > spark plug wires? Good point. I've had bad trigger points do this. In my case the "dwell" was off. This is a possibility worth checking. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org