[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Okay, I have checked ALL of this out and everything seems correct. Even verified that main bearing is not loose in the case. Now what? > Can someone tell me the possibilites, and what does everyone set their > endplay at? A few possibilities: Insuffficient gland nut torque Dowel holes elongated, burred, not deep enough... Crankshaft and flywheel not both of the O-ring style, or crankshaft and flywheel not both of the non O-ring style. Gasket used with O-ring style crank/flywheel, or O-ring used with gasket style crank/flywheel. Wrong size main bearing, either ID, OD, or thrust Main bearing loose in case, causing misleading end play readings Wrong shim washers (O-ring vs non O-ring style) used I think the range for end play is .003-.006" and I usually shoot for .004". - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/