RE: [T3] Suspension fixed was rotted needle bearings

[Russ Wolfe <Russ_Wolfe@MAHLEParr.com>]

> Subject: Re: [T3] Suspension fixed was rotted needle bearings
> 
> 
> The bad part about this is that the bearing outer diameter
> is 42 mm versus our correct one of 44mm. The inner diameter
> is 35mm and length is 20mm which is correct, to install these
> you must insert this in a 2mm thick sleeve with an outer diameter
> of 44 mm which would be correct.
> 
> The sleeve would be 1mm thick, if the o/d is 2mm bigger.  ; p
> 
Or about .040" (forty thousands of an inch) for us Yanks. :P~~

Russ Wolfe

Mahle-Parr Filter Systems

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe