[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 10 May 2001, at 14:56, thom perkins wrote: > hi everyone. i noticed a pretty good leak yesterday. it looks like > my oil cooler seals are leaking again. i replaced these about 2 years > ago. i replaced them with ROL gaskets, which i'm not going to do > again. does anyone have any suggestions as to gasket brand i should > use, and should i replace the oil cooler when i'm in there? Don't replace the cooler unless IT is leaking, and this is not common. I don't have any favorite brands of gaskets, but anything should have stood up correctly for much longer than 2 years. There is a LOT of confusion about the proper installation of parts for different year type 3 oil cooler seals. I have a FAQ if you haven't already gone to Toby's site and gotten it there. I also have the proper seals for your 67 engine. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/