[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 10 May 2001, at 15:09, Mark Healey wrote: > I got the valves gapped and the dwell and timng set. I tried to turn > it on and it started right away and ran for about a minute (hence I > was able to measure the dwell), then died. It wouldn't start again. I > smelled alot of unburned gas so I went away for about an hour. When I > came back it started right up, died then wouldn't start again. Is your pressure sensor hose connected on BOTH ends? Is your charging system regulating voltage above 13.5V? Is your fuel pressure set between 28 & 30 psi? - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/