Re: [T3] shifter bushing

["Jim Adney" <jadney@vwtype3.org>]

On 6 May 2001, at 21:38, Jedediah Millheiser wrote:

> i would assume the shifter bushing is the one i need
> to replace?  the current problem is that the shifter
> is EXTREMELY sloppy.  its almost impossible to find
> first gear.   from what ive been told a worn shifter
> bushing usually causes this

It really could be either the coupling or the bushing. I would start by 
checking the coupling because you can get to it and just check it. 
It is held on with a pair of set screws with 8mm SQUARE heads. A 
5/16" 8 point socket fits these perfectly. Make sure they are tight.  

-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe