[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] about spindles and steering box

To: "type3" <type3@vwtype3.org>
Subject: Re: [T3] about spindles and steering box
From: "Dave Hall" <dave@hallvw.clara.co.uk>
Date: Thu, 29 Mar 2001 22:00:23 +0100
References: <03be01c0b7e5$0c5eb120$0400a8c0@wyrless.net>
Resent-date: Thu, 29 Mar 2001 16:34:26 -0500
Resent-from: type3@vwtype3.org
Resent-message-id: <"UWQ_cB.A._6.gp6w6"@client4.hv-ywh.com>
Resent-sender: type3-request@vwtype3.org

Steering box adjustment - have you checked the bottom (big hex socket screw)
first?
If not, I can't understand why so few seem to follow the Bentley
instructions!

The pre-68 tie-rod ends are Beetle parts, so should have worked!  131 415
811 (LH thread) and 131 415 812 (RH thread).  The angled one (inner short
rod) is a Type 3 part.  I guess from the number these are Super Beetle
parts; maybe you got the standard ones by mistake.

Dave.
UK VW Type 3 & 4 Club
http://www.hallvw.clara.co.uk/
------


-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe

References:
- Re: [T3] about spindles and steering box
  - From: "Russ Wolfe" <russella@prairieinet.net>

Prev by Date: Re: British VW shows
Next by Date: Re: [T3] 40 year celebration meeting.
Previous by thread: Re: [T3] about spindles and steering box
Next by thread: Re: [T3] about spindles and steering box
Index(es):
- Date
- Thread