[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> How do i adjust the idle speed(dual solex 32PDSIT's)? You adjust each carb to give equal suction using the throttle stop screws (which are hex-head screws near you towards the bottom of the carb). The suction on each is measured with a uni-syn or similar device held on one carb at a time. Once it seems OK, reconnect the adjustable throttle rod having made it fit the gap between the ball-ends. You must not disturb the position of the carb throttle levers to do this. Check if the balance is still there through a reasonable rpm range. At high engine speeds, balance isn't quite as important as the balance pipe can help a lot to keep things even. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org