[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 13 Mar 2001, at 20:39, Greg Merritt wrote: > >The "stub" was a threaded screw. This would allow you to slightly adjust the > >angle of the mirror mount. I don't buy this, as it only allows adjustment thru an angle that will have little effect on the position with respect to the driver. Plus there's not much adjustment available, the adjustment is only in one direction, and any movement in that direction will only be releasing the mirror from its mount. > Whoa, right on! This is all too wild. > > I just looked at my '69 Squareback's stub from the outside, through > the windshield. It is a tapped hole. There is no screw, though. Your mirror came with a screw in it. It had a thin serrated metal head with a cylindrical black rubber bumper on it. When backed out slightly it would bear against the windshield. Sorry to hear that someone lost it. 8-( - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/