[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 28 Jun 2001, at 12:14, Mike Wodkowski wrote: > I tore out the old seals and semi-installed the new ones with a little RTV > just to hold them in place. What do I do to train them to seal right? My > drivers side seal is a little wobbly at the top and at places goes under the > door frame rather than lipping straight on it. You probably need to leave the door open until the adhesive is cured. (I like the 3M weatherstrip adhesive.) Once the adhesive is dry you could add some Talc or silicone to the gasket to make it slippery so it will curl over properly when the door is closed. If you try to close the door before the adhesive is sound you will pull the gasket out of position and have to start over. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/