[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Subject: [T3] clutch release arm removal for return spring replacement > Hello. > > 1968 fastback. Brokern clutch return spring. > You've been a help to me in the past so I'm sending > you this question about VW's. How would you reccomend > I replace the spring. How could I do it without > removing the clutch release lever. It is stuck. > The spring will go on without removing the arm. You just have to have a little patience. Work it over the arm, and get the end that goes against the transmission case in place first. Then use a screw driver or such to pry the other end around, and hooked to the clutch arm. Russ Wolfe russw@classicvw.org http://www.classicvw.org/ ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe