[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
hey guys, i finally have my engine in and my fuel pump installed and wired.
and John Riley your bra will be on its way on Tuesday! Thanks a Ton! now I
have a couple of Questions. 1 i have to run fuel lines. I have the front
end connected.. but the return line.. (hard line through tunnel) I cant get
air to go through it.. what could i use to clear it out? now.. on the rear..
in the engine compartment.. can anyone take a picture of how their lines are
run? I hae the 3 way T-s on mine and a cold start injector on the right
side. but i am still not sure how to run them and i cant figure it out per
bentley as they dont show the lines that come straight up off between the
injectors.I am confused on that. this is a 1970 Setup. C-Brain and harness,
thanks Jim! and one other question... on my wiring.. I have 2 connections
that i dont know where to connect. there is on the left side of the engine
close to the beginning of the wiring harness a 2 plug connector. I think in
the bentley an muir its T-2? What wires go to this? I am thinking something
under the seat? (relay) and he one directly behind the throttle body. its
T-1 I think.. does this wire run all the way up to the fuel pup relay for
the Main power to the brain? I need a little help. and if anyone has a
digital camera and wants to take some pictures please E-Mail them to me
direct. at killer70vw@hotmail.com Any and all help and comments are greatly
appreiated!!!!
Thanks guys!
Jason 1970 TIII Fasty undergoing Full stock resto.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe