Re: [T3] Some powder-coated parts

[DGaries808@aol.com]

In a message dated 6/4/01 6:49:40 PM Central Daylight Time, goob@home.com 
writes:

<< Subj:     Re: [T3] Some powder-coated parts
 Date:  6/4/01 6:49:40 PM Central Daylight Time
 From:  goob@home.com (David Yaghoubian)
 To:    TYPE3@vwtype3.org
 
 At 05:02 PM 6/4/2001 -0400, DGaries808@aol.com wrote:
 >Today, I took an oil-bath air-cleaner from my Type 34, a sparkplug wire tube
 >from my HebmŸller, and a HebmŸller hand-crank to Quality Powder Coating to
 >get the parts powder coated black.
 >
 >The oil-bath air cleaner was the more difficult part. It was about 2.5 feet
 >long. It covers
 >the two carbs.
 
 
 HI Don-
 
 I'd be curious to know what they are charging for the air cleaner as I'm 
 pondering doing the same thing with my cleaner and sheet metal next time I 
 have the engine out.
 
 Cheers,
 
 Dave Y.
 68 Square
 
 $75 plus the cost of sandblasting, or about $100 for all three parts (the 
spark plug tube, the hand crank, and the air cleaner. I'm taking two more 
parts in to get them powder coated tomorrow - the engine cover and the gizmo 
that goes across the engine (I don't know what you call it - a shroud?) off 
the Type 34.

Don Garies
dgaries808@aol.com

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/