Re: [T3] Oil cooler seals. Leaking

["Ralph" <ralph855@earthlink.net>]

I have a problem with my oil cooler also, I notice every so often oil
leaking very slowly on top of the engine coming out of the bottom of the oil
cooler.  What should I do? Can I buy the seals in the catalogs?  or can I
tighten them up, (the bolts).  I did notice one of them missing of the
three.

Ralph, 1970, fastback, AC, Auto.

-----------------------------------------
Why is on oil cooler hole bigger than the other..?  1is the
> > inlet and 1 is the outlet, but if one is bigger than the other,
> > then which seals do i use?  its an 8mm case and an 8mm cooler, but
> > this doesnt seem right to me.
>
> If this is an early cooler it will not have the part # stamped on the
> top, near the oil pressure switch boss.
>
> The 2 holes may be slightly different sizes, but I don't think they
> are very different, and certainly not as big as the late cooler holes.