[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
----- Original Message ----- From: Dave Campen <dave@campen.eurobell.co.uk> > I've just popped the back off the clock, drenched it in Plusgas and then > solvent. Luckily the fly-back had stopped with the points open, so the > fusible link was intact. After a bit of prodding, the clock is now ticking > away happily on my kitchen table so I can check if it keeps time. The only > problem seems to be that the flyback doesn't use its full travel, so it > "clunks" about every 5 mins instead of 10 mins. This is probably caused by > the lube being dry, so I'll try that next. > Actually, the 5 mins is more like 2-3mins, but a bit of lubrication seems to have helped (doesn't it always), so I'm just going through the slow process of adjusting the speed so it keeps time. ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe