[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> Subject: RE: [T3] From seat guide rails to Carpet Nails.... > > > I used the 3M contact cement (spray on). Works great! (Is > there ANY 3M > product that isn't :) Nails? That's new to me but I don't > recommend it, > far too much opportunity for water to get in the car. > > The factory used nails to hold the carpet in place. I suppose this was done, because they didnt have the time on the assembley line to wait for the glue to dry. You will find them on an OEM set up at the upper corners of the sill carpet, and I think in the lower rear corner of the front side kick panel carpet. Russ Wolfe russ_wolfe@MAHLEParr.com Mahle Parr Filter Systems 505 E. Madison Winterset, IA 50273 ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/