RE: [T3] Any carbs for sale?

["jason_r.ford" <veedub@apartment101.com>]

Does anybody have diagrams online or scanned pages from a Bentley manual of
the carb/manifold setup for the 32 pdsit?

-----Original Message-----
From: Jason Weigel [mailto:notchboy@home.com]
Sent: Sunday, July 08, 2001 10:56 PM
To: veedub@apartment101.com
Subject: Re: [T3] Any carbs for sale?


They will work just as well. The webbers do not have chokes at all, not a
problem if you are
not picky. Baby dells will work as well. Expect to pay $200-$300 for used
webbers. If I had to
choose I would probly go for new webbers. If I wanted to be vintage- go
solex. Oh yeah, another
aftermarket kit out there is brosal. Its the Brazilan version os the solex.
All these will
work. Good luck!

"jason_r.ford" wrote:

> If it were you, would you opt for a set of aftermarket carbs, like Weber
34's or something?
>
> ---------- Original Message ----------------------------------
> From: Jason Weigel <notchboy@home.com>
> Date: Sun, 08 Jul 2001 10:54:14 -0700
>
> >If I had to have the set on ebay I would go to $250-$300. Even thats a
gambel,
> >but everything on ebay is. They look clean and compleet. Some small stuff
is
> >missing.
> >
> >"jason_r.ford" wrote:
> >
> >> Thanks for the info.  My engine number is T0665838, so that might just
be a
> >> '67 case.  I'm not certain about the heads, but its likely those are
the
> >> original heads for that particular case, too.
> >>
> >> I think I may have some other manifolds for a Type 3 Dual Port for
Solex
> >> carbs.  If they fit a dual port carbureted engine, is it safe to assume
> >> they're from a '67 or aftermarket manifolds?
> >>
> >> -----Original Message-----
> >> From: Russ Wolfe [mailto:Russ_Wolfe@MAHLEParr.com]
> >> Sent: Friday, July 06, 2001 11:25 AM
> >> To: 'type3@vwtype3.org'
> >> Subject: RE: [T3] Any carbs for sale?
> >>
> >> > Subject: RE: [T3] Any carbs for sale?
> >> >
> >> >
> >> >
> >> > By the way... does anybody know what the factory carbs should
> >> > have been for
> >> > a 68 1600 Dual Port? And do you know what other "comparable"
> >> > carbs I could
> >> > consider?
> >> >
> >> > Jason
> >> > 68 Notch
> >> >
> >> >
> >> The orginal carbs for a 1600cc Dual Port were 32-PDSIT-1 and -2. But in
the
> >> US, the '68 did not have dual carbs, it only came with FI. The only
stock
> >> manifolds that will work with a dual port are from a '67.
> >>
> >> Russ Wolfe
> >> russ_wolfe@MAHLEParr.com
> >>
> >> Mahle Parr Filter Systems
> >> 505 E. Madison
> >> Winterset, IA 50273
> >>
> >> -------------------------------------------------------------------
> >> Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe
> >
> >