[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Jason=> How much should I expect to pay? Bear in mind that the linkage are the hardest parts to find, and finding all in one place is worth a lot. You need: Linkage includes: Bellcrank Bellcrank stand 2 long adjusting rods 2 short adjusting rods Some years: accel cable extender/adjuster You're getting the air cleaner. With that you should get a center air-cleaner stand, the wingnut for that, the balance-tube center clamp, and the rubber joint gasket for the air cleaner itself. These last are pretty rare, most folks use slices of inner tube. The carbs need choke heaters for your voltage, complete choke linkage, venturis sized to your engine, cutoff jets (usually electric), bakelite manifold insulators, manifolds, and the balance tube that fits the manifolds. Single-port manifolds also take connector hoses for the tube. And don't forget the tee fitting for the fuel supply hoses. All that in good condition is worth a lot, probably $400-600. Steven Ayres, Prescott AZ '66 Grossse Karmann ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe