[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
----- Original Message ----- From: "Barry Viss" <barryviss@yahoo.com> To: "type 3" <type3@vwtype3.org> Sent: Sunday, January 28, 2001 2:07 PM Subject: [T3] seat rail stops > Hello everyone, > Yesterday I took out my seats in order to give them a good cleaning and I > noticed that there was a small, extra, non-painted metal plate thingie > screwed onto the back of the inside rail which was keeping the seat from > going one more inch into it's rear most position.(both sides) Being 6 foot > 4 inches tall, I jumped at the chance to gain an extra inch of foot room. > Does > anyone have any idea why these were put in there? Should I put them back? > I don't remember anything screwed to the rails. There should be some plastic covers over the rails. They may be broken, and somone did that to help. There should be some spring clips near the front of the inner rails to keep the seat from sliding off forwards. If the seat works without them, I would say go for it. Just make sure the seat cannot come off the back of the rails while driving. Russ Wolfe russw@classicvw.org http://www.classicvw.org/ ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe