[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Well my personal experience (from last month) is 9 down each side of the rockers,13mm wrench size, 4 upfront (near brake master cylinder)17mm wrench size, 2 on the front beam 15mm wrench size, 2 under the rear seat(under the gray plastic caps) 17mm wrench size, and 2 behind the rear seat(variant)in the trunk(fasty/notch)17mm wrench size. If you have IRS then you also need to remmber to remove the 4 bolts to the engine hanger. You also need to take out the 2 screws that bolt the steering shaft to the steering box,and remove the brake hoses to the master cylinder.It's good advice to remove the fuel tank before getting to far into this project. Bob 70 Fasty AT,65 Notch ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe