[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 15 Jan 2001, Mark Fuhriman wrote: > possibility of bad wiring at the FI trigger points, so I plan to splice > (solder) in a good harness piece for the trigger points. I'll cover the > joint with shrink tubing. The harness piece that is on there now is not Mark, Make sure that the replacement female spade conenctors that are in that plug are clean, well connected to their wires, and that each firmly grips the corresponding tab in the points' plug receptacle. It's very easy to remove the spade connectors from the plug, if you insert a piece of thin, stiff wire to depress the lock tab. What I'm getting at is that a good looking plug with good looking wires sticking out of a good looking boot might still have some problems within the plug. Cheers, -Greg ------------------------------------------------------------------- Pitch in! Send your pledge of support! mailto:support@vwtype3.org